radon barrier installation
Radon Gas Protection
All new buildings in Ireland must comply with the National Building Regulations and Radon Barriers are required in all areas confirmed to have high levels of Radon gas. All sites need to be tested for Radon levels and mitigation measures taken where contamination exists.
We are specialised Radon Barrier installers and offer fully certified protection from the dangers of Radon gas.
Meet Irish building standards with our help.
What is Radon gas and why is it dangerous?
The government categorises radon gas as a Class 1 carcinogen and blames it for 300 cases of lung cancer per year. Radon leeches from the ground that contains deposits of uranium and thorium in igneous rock. These radioactive elements naturally degenerate over time, giving off radon gas.
Radon gas comes from natural processes and, in most cases, escapes harmlessly into the atmosphere. It poses no threat when it moves from the ground into the open air.
Over 55% of all human exposure to dangerous levels of radiation comes in the form of radon gas.
Radon is an odourless, tasteless, and colourless substance that comes into a structure, builds up and poses a gradually expanding threat to any within.
Radon gas leaks into a building from the ground underneath and slowly builds-up in the air inside the structure. Once above ground, radon quickly disintegrates into radioactive particles. When inhaled, they attach themselves to lung tissue, where they can form a serious cancer risk.
This gas poses the most serious threat when it rises into a structure that has adopted modern energy-saving techniques such as double-glazed windows and sealed door frames. It enters through cracks in floors or also holes where wires and pipes enter the home. Older and drafty homes, in most cases, allow radon gas to escape without building up to serious and damaging levels. Radon gas can also enter a home through well water and pose similar risks.
What areas present the most danger?
Ireland has two major regions where the threat of radon gas rates the highest. Almost all of Connaught, with the exception of coastal areas, potentially could see 20% or more homes affected by radon gas levels above safe levels. The southeastern coastal areas around Leinster and Munster also have higher levels of radon penetration.
This does not mean that other areas are in the clear. Most of Ireland has five per cent or more structures that potentially have dangerous levels of the gas. Almost no part of the country experiences no threat from the gas.
current regulations concerning radon gas
Radon gas and other hazardous materials are regulated under the Safety, Health, and Welfare at Work Act of 2005. Employers have the responsibility and obligation to test for elevated and unsafe levels of radon and other substances.
Specific areas where employers must perform tests include:
- Underground workplaces, including mines and show caves
- Ground floor or basement workspaces in areas with high instances of radon gas contamination
- Areas identified by the EPA as having high levels of radon gas contamination
In early 2019, the government reduced the legally acceptable level of radon gas in a workplace structure from 400 becquerels per cubic metre to 300. One becquerel equals a single radioactive decay per second. The government suggests that consistent exposure to 200 becquerels per cubic metre serves as a danger to health and safety.
Workplaces that have levels above 300 must implement mitigation procedures to bring radon levels back below legally acceptable rates.
In all cases where the government requires radon gas reporting, the EPA provides a template to follow.
how to mitigate the threat of radon gas?
The EPA requires radon measurement and remediation service providers to register with the government.
Experts agree that ‘do it yourself’ solutions to radon gas contamination can make the problem worse if not performed properly.
A contractor who specialises in radon remediation gives property owners the best chance to make their structure both safer and legally compliant.
The best fix for radon comes from having a contractor install a radon control or removal system. Passive measures block radon from entering the structure. This includes tracking down points of entry and sealing them off. Active measures, including pumps, will provide an effective way of removing the threat.
The best way to mitigate radon gas contamination, however, lies in building a radon-proof building from the start. Install a gas permeable aggregate topped with plastic sheeting to stop the flow of radon gas into the structure. Make sure that all cracks and other openings are well sealed. Finally, install a three to four-inch gas-tight pipe from underneath the structure to the outside, creating a natural vent for the gas. A vent fan can turn it into an even more effective removal device, actively drawing the gas from inside to outside.
Making radon gas a priority can keep your home or business safe from one of the world’s most deadly carcinogens. Start the process of protecting yourself and, if an employer, complying with the law, by testing as soon as possible.